Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Like if the engine is just the engine, no water pump, cap, them kinda things. will i be able to put my tbi from my 305 onto the 350? the engine mounts should all be the same, and will it slide right into my tranny?
Yes, everything off a 305 should be a direct fit to a 350, same engine block. You can use your intake, tb, dist., flywheel, and all your accessories. Your trans will bolt to it. If you go back with a tbi engine, all you will need is a PROM chip for a 350.
I know the knock sensors are different for a 350/305, and they are also different for a manual/auto truck. No idea why, but you will need one of these.
allright, well this engine im buying for like $200, is missing two pistons because the guy took them out to put in a different rebuild. how would i go about fixing this? i wanna put all new spark plugs in it, what would you suggest? What brands is best to look for?
Little more info needed here, if the engine is already torn down, I would def. recommend a complete rebuild. I run ac delco plugs, they are rated to last 100,000 miles.