Stuck Front Axle

[Bob L]

How heavy is your slide hammer? anything under 3lb. slide weight is a toy.

 

[deadbeat]

5 pounds. I stood the front end up on saw horses with the hammer down and with a helper holding it and wrapped a rag around the slide, and slammed it hard as I can and it didn't move.

https://www.amazon.com/OTC-4579-9-W...d=1535678503&sr=8-3&keywords=otc+slide+hammer

 

[turf]

I had to pull the front diff and take it apart to get mine out, whatever you do make sure you use new clips or they will get stuck again. there are a few vids on google on how to pull the shaft with no damage.

Any chance you have rebuild specs for the front diff? mine is currently out but i want to make sure i rebuild it proper. if the bearings arent set up right it will cause the front seals to leak.

any input is appreciated. thanks

 

[hatzie]

I had to pull the front diff and take it apart to get mine out, whatever you do make sure you use new clips or they will get stuck again. there are a few vids on google on how to pull the shaft with no damage.

Any chance you have rebuild specs for the front diff? mine is currently out but i want to make sure i rebuild it proper. if the bearings arent set up right it will cause the front seals to leak.

any input is appreciated. thanks

The service manuals will have the torque specs.

 

[turf]

The service manuals will have the torque specs.

Many Thanks