C
ctvaughn
Latest activity Postings About
-
-
Cctvaughn replied to the thread Non-slip yoke.Alright, after some more cleaning and regreasing I was finally able to tap it on with a 3lb hammer and a block of wood. Slides much...
-
Cctvaughn replied to the thread Non-slip yoke.This is what I was thinking of next too, thanks. Gonna see if I can polish it up well enough and maybe even soak it in evaporust in a...
-
Cctvaughn replied to the thread Non-slip yoke.Seal is fine it doesn’t even get that far right now, but it definitely looks like it’d fit fine in there.
-
Cctvaughn replied to the thread Non-slip yoke.Unfortunately I’m the guy who needs to get jacked up. Figured it’d be fine to run after scrubbing. Probably gonna end up paying for that...
-
Cctvaughn replied to the thread Non-slip yoke.It seeks like much of the corrosion is on the transfercase output shaft. I’ve scrubbed the slip yoke pretty well and it looks good so it...
-
Cctvaughn replied to the thread Non-slip yoke.Got busy over the week and just now had a chance to get back at it. I measured the ID of the slip yoke and the OD of the output shaft...
-
Cctvaughn replied to the thread Non-slip yoke.Will give this a look tonorrow, thanks.
-
Cctvaughn replied to the thread Non-slip yoke.The slip yoke has the missing spline, but the tcase output shaft is symmetrical all around.
-
Cctvaughn replied to the thread Non-slip yoke.I cleaned it out already and still no luck unfortunately
-
CAlright so I put in a rebuilt NP241C in my 1990 K1500 and for whatever reason the slip yoke will not slip onto the rear output shaft...
-
-
Loading…
-
Loading…
