Sully
I'm Awesome
lets start from scratch please.
I have no spark at the plugs or coming from the coil.
I have a new crank shaft position sensor, ignition control module, and ignition coil as of this past 4-5days. I have tested the wiring harness for the crank shaft position sensor to be good, and still get P0336 and 339 cels. I have good voltage going to the control module and the coil. The distributor cap and rotor have both been removed, cleaned and inspected. They were new in nov/dec when the new motor went in. I have left the trucks batteries unplugged over night to clear any codes. Nothing is working yet.
The only thing left I can think to try is reflashing my ecm and seeing what happens.
I have no spark at the plugs or coming from the coil.
I have a new crank shaft position sensor, ignition control module, and ignition coil as of this past 4-5days. I have tested the wiring harness for the crank shaft position sensor to be good, and still get P0336 and 339 cels. I have good voltage going to the control module and the coil. The distributor cap and rotor have both been removed, cleaned and inspected. They were new in nov/dec when the new motor went in. I have left the trucks batteries unplugged over night to clear any codes. Nothing is working yet.
The only thing left I can think to try is reflashing my ecm and seeing what happens.
Last edited: