Bensett004
Newbie
- Joined
- May 9, 2013
- Messages
- 18
- Reaction score
- 0
So i am looking at some lifts and was wondering what you guys think about this? right now I have 2 in blocks in the rear and torsion bars cranked up, also flipped the ball joints....before doing all this i didnt realize that i wouldnt be able to correct the alignment from the ball joint flip so i have a small amount of positive camber, now that i have almost trashed a good set of 33-12.5-20 mudd grapplers im ready to fix it before buying new....heres my question, I want to go with 35's, i already have 3 in body lift, if i were to return ball joints to stock and run 1" blocks with t bars half cranked will they clear? I was also wanting some wheel spacers, will that make any difference? and does any one have any exspierience with this lift? http://www.ebay.com/itm/380660764668?_trksid=p5197.c0.m619 its a rough country 3" suspension lift, if i do use that lift do i have to change they keys? I tryed to change them before and had no luck......any help will be nice...thanks