project 67 sub
I'm Awesome
so i bought some used lift spindles for my 90 sierra that im lifting back up (its lowered right now) and im having a MAJOR issue and i need help as fast as possible. it currently has bell tech drop spindles and heavy duty rotors/bearings (94 silverado extended cab). my problem is that the bearings and brake rotors will not fit correctly on the spindle... the inner bearings (timken set5's) fit the lift spindle and the drop spindle, the outers (timken set3's) also fit the lift spindle and drop spindle, they also fit inside the rotor correctly as well... now, when i install the brake rotor onto the lift spindle it pushes the outer bearing out to far and it wont seat on the spindle, which also causes me to not have enough room to put the key wayed flat washer and nut on, and put a cotter key in the hole. i did a quick measurement of the drop spindle and the lift spindles center shaft (or whatever you wanna call it) and the lift spindle is almost a half inch shorter than the drop spindles center shaft. i did all kinds of searching on the internet trying to find answers but i came up empty handed other then finding out what brand my spindles might possibly be from looking at lift spindle pics... basically what i need to know is what 5 lug rotors to use with my bearings on my lift spindles. PS. thanks in advance
my lift spindles look these.
here are my actual spindles
and the truck they are going on
have these waiting to go on it as well
im going for somewhat of this look with mine just not as big of a tire
my lift spindles look these.
You must be registered for see images attach
here are my actual spindles
You must be registered for see images attach
and the truck they are going on
You must be registered for see images attach
have these waiting to go on it as well
You must be registered for see images attach
im going for somewhat of this look with mine just not as big of a tire
You must be registered for see images attach
Last edited: