Looking to rebuild the entire front end on my 92 C1500 because everything is shot (steering, ride quality, etc.) The steering is so bad as a matter of fact that with the truck jacked up, key unlocked, the wheel is crazy hard to turn (almost as if the tires are on the ground!) Not to mention every bump is a disaster even after doing the shocks.
Any recommendations for parts? (ACDelco vs Moog vs Mevotech, etc.) I'm looking to get idler & pitman arm, tie rods, lower control arms (rotted bad & the capture nuts for the shock mounting bolts broke), ball joints on the existing upper control arms, and of course sway bar links. I know it's going to break the bank but would like to soften the blow as much as possible without getting terrible quality parts.
It's long overdue at 170k with stock everything!
Any recommendations for parts? (ACDelco vs Moog vs Mevotech, etc.) I'm looking to get idler & pitman arm, tie rods, lower control arms (rotted bad & the capture nuts for the shock mounting bolts broke), ball joints on the existing upper control arms, and of course sway bar links. I know it's going to break the bank but would like to soften the blow as much as possible without getting terrible quality parts.
It's long overdue at 170k with stock everything!