Exhaust help

Discussion in 'GotExhaust.com' started by jarid, Feb 20, 2018.

  1. jarid

    jarid Newbie

    Messages:
    4
    Likes Received:
    1
    Joined:
    Feb 20, 2018
    Location:
    Saskatchewan
    looking for advise. Got a 92 gm reg cab long box 4x4. Found a rolled 93 gm Ext cab 2wd short box with a new dual Ext set up. Guys parting truck out and can get it fairly cheap. Question is will it fit my reg cab? How much hassle to get it to work? Thanks
     
  2. kennythewelder

    kennythewelder B31-3 (6-G) certified

    Messages:
    2,526
    Likes Received:
    756
    Joined:
    Jul 14, 2014
    Location:
    Louisiana
    The frame length on the two trucks are the same, so it should fit.
     
  3. jarid

    jarid Newbie

    Messages:
    4
    Likes Received:
    1
    Joined:
    Feb 20, 2018
    Location:
    Saskatchewan
     
  4. jarid

    jarid Newbie

    Messages:
    4
    Likes Received:
    1
    Joined:
    Feb 20, 2018
    Location:
    Saskatchewan
    Thanks. I thought they would be the same.or close to. Wasn’t sure how figment was gonna be. If it is gonna be to much hassle I was just gonna do new. Figured maybe someone has done it before. Don’t wanna pass up a decent deal if it’s gonna work.
     
  5. kennythewelder

    kennythewelder B31-3 (6-G) certified

    Messages:
    2,526
    Likes Received:
    756
    Joined:
    Jul 14, 2014
    Location:
    Louisiana
    I spent some time doing my exhaust. I did a custom system, but I am a welder, so for me it was a breeze. I cut off the old OE 2 into 1 big muffler, and replaced with 2 old school glasspacks, The went to the junk yard and got another OE tail pipe. I cut this up and bought a little straight pipe, and made it go around my spare tire. I built 2 custom stainless steel tips and welded everything together. I also have shorty headers, and I gutted my cats. The 96 up trucks have dual pipes going into one muffler, so it makes it easy to do a true dual set up. 20161108_125326.jpg 20161108_125206.jpg 20161108_125145.jpg DSCN1582.JPG DSCN1570.JPG
     
  6. jarid

    jarid Newbie

    Messages:
    4
    Likes Received:
    1
    Joined:
    Feb 20, 2018
    Location:
    Saskatchewan
    Looks good. I think it should work if I pick it up. Thanks for the input.
     
    kennythewelder likes this.
  7. lessersivad

    lessersivad Newbie

    Messages:
    44
    Likes Received:
    17
    Joined:
    Dec 23, 2017
    Location:
    Southern Michigan
  8. kennythewelder

    kennythewelder B31-3 (6-G) certified

    Messages:
    2,526
    Likes Received:
    756
    Joined:
    Jul 14, 2014
    Location:
    Louisiana

Share This Page