HilljackMcgee
Newbie
So here is another question.
What I am currently trying to do is spec out my fuel injectors for this intake build, for now utilizing the pro flo xt with the pro flo fuel rails.
So my questions:
I need high impedance injectors, correct?
Ohm range which I would need to look for?
Here is the # for the fuel rail kit/info I grabbed from their website.
The Edelbrock # 3627 Fuel rail kit including provisions for either Pico or standard height injectors is available.
I am confused when I search for injectors as injectors is still fairly foreign to me (concept is easy, types....no idea) as I am still learning about them.
There seems to be varies types.....what should I be looking for?
Looks let there multiple different connector styles which is not that important to me as I will be pig tailing them to the main harness, any issues there?
Driver type? I am assuming that is the load that is activating the injectors on/off, correct?
I see 12v saturated system, which from my research, defines it basically straight 12v on off switch via the pcm, correct?
Is there different length and width sizes?
Sorry y'all I am asking so many questions, this is prob my last set of questions before i complete my intake build list/price analysis. For all that help me, thank you so much for your insight and patience, I am very grateful.
Sent from my SM-N975U using Tapatalk
Anyone have any insight?