Moparmat2000
I'm Awesome
Hi Y'all,
I have had this problem for a long while on my 94 silverado. I bought this truck new and have cared for it all these years and now with lots of miles, smiles, and memories, i have found the ultimate GMT400 forum for my old girl. So i have to ask, my doors rattle on the latch pins when going over rough roads of ehich we have a lot of out here where i live.
I have replaced the upper and lower hinge pins and bushings on the drivers side door years ago when they failed and before the door could do any damage to the hinges, latches, or door jamb. Passenger side is still good. Bushings are intact.
It sounds as if the door catches are rattling up and down on the latch pins. I planned on removing the door panels to clean and regrease the window regulators, and replace a pair of lazy door lock actuators. I also planned on removing the door catches to clean and regrease them.
Is there anything to look for specifically on the catches, or maybe eomething on the catches that may need to be repaired to tighten them up again. I'd love for my doors to not rattle on the buckboard roads out here.
Thanks in advance.
Moparmat2000
I have had this problem for a long while on my 94 silverado. I bought this truck new and have cared for it all these years and now with lots of miles, smiles, and memories, i have found the ultimate GMT400 forum for my old girl. So i have to ask, my doors rattle on the latch pins when going over rough roads of ehich we have a lot of out here where i live.
I have replaced the upper and lower hinge pins and bushings on the drivers side door years ago when they failed and before the door could do any damage to the hinges, latches, or door jamb. Passenger side is still good. Bushings are intact.
It sounds as if the door catches are rattling up and down on the latch pins. I planned on removing the door panels to clean and regrease the window regulators, and replace a pair of lazy door lock actuators. I also planned on removing the door catches to clean and regrease them.
Is there anything to look for specifically on the catches, or maybe eomething on the catches that may need to be repaired to tighten them up again. I'd love for my doors to not rattle on the buckboard roads out here.
Thanks in advance.
Moparmat2000