Thunderstruck20
OBS Enthusiast
- Joined
- Aug 19, 2011
- Messages
- 77
- Reaction score
- 14
I was looking at 8-10 Lug adapters for my truck and before I make any decisions want to know exactly what the differences are in my hubs. The front is a 1990 Ford Dana 60 dually and the rear is a Dana 70 dually out of an 80's Chevy. I assumed there was no difference between the two centering rings but when I put the dually hubs on the front I had to grind out the centers of the front rims because the holes were too small. I ran into no such problems with the rear axle when I swapped that over from the stock SRW 14 bolt. Any information is greatly appreciated, thanks.