Diesel Bumper and some KC HiLites

Discussion in 'Paint / Body / Detailing' started by ZSEVEN1, Sep 10, 2017.

  1. ZSEVEN1

    ZSEVEN1 Newbie

    Messages:
    13
    Likes Received:
    11
    Joined:
    Jul 31, 2017
    Location:
    North East Kansas
    Been working the past few days on this project....

    Got the bumper from LMC, and a buddy of mine fabbed up some light brackets and welded them in.

    Installed a foglight switch from a Tahoe Limited

    Went with some green LEDs for the gauges while I was in there.

    [​IMG] [​IMG]
    [​IMG] [​IMG]
     
    Project400 likes this.
  2. spiderjohn

    spiderjohn OBS Enthusiast

    Age:
    44
    Messages:
    62
    Likes Received:
    24
    Joined:
    Sep 10, 2015
    Location:
    Rhode Island
    Looks great

    Sent from my SM-T580 using Tapatalk
     
  3. deejaaa

    deejaaa I'm Not Awesome

    Messages:
    637
    Likes Received:
    273
    Joined:
    Jan 28, 2015
    Location:
    Somewhere on the Texas coast
    nice. what stereo is that?
     
  4. ZSEVEN1

    ZSEVEN1 Newbie

    Messages:
    13
    Likes Received:
    11
    Joined:
    Jul 31, 2017
    Location:
    North East Kansas
    Thanks!

    Thanks! The stereo is a Pioneer AVH P5200BT. It has a motorized slide out touchscreen. They are pretty cool stereos. They don't make it anymore but have other models like it of course.
     
  5. BoxerPitMix

    BoxerPitMix Chris

    Age:
    34
    Messages:
    2,839
    Likes Received:
    460
    Joined:
    Jul 30, 2013
    Location:
    Magnolia, TX (KY Transplant!)
    Looks badass!
    I should have used some KC lights like that. I found Limited/Z71 for my diesel bumper. Those look way better!
     
  6. ZSEVEN1

    ZSEVEN1 Newbie

    Messages:
    13
    Likes Received:
    11
    Joined:
    Jul 31, 2017
    Location:
    North East Kansas
    Thank You! Yeah I'm really liking the look of the KC's.

    Thinking it might need a cowl hood next.
     
  7. Pychokenny

    Pychokenny Newbie

    Age:
    33
    Messages:
    12
    Likes Received:
    5
    Joined:
    Mar 2, 2017
    Location:
    Parkin, AR
    How did u mod the fog switch to fit the top hole
     
  8. ZSEVEN1

    ZSEVEN1 Newbie

    Messages:
    13
    Likes Received:
    11
    Joined:
    Jul 31, 2017
    Location:
    North East Kansas
    Well, since the 3-hole bezels are pretty much unobtanium, I ordered a 2-hole bezel from ebay, cut the lower bezel off of the ebay one, and jb welded it on to my bezel in the top spot after cutting off the blank one. Worked out really well since the opening for the airbag switch and the fog switch were the same. Got the fog switch off of ebay as well.
     
    Pychokenny likes this.
  9. mars2878

    mars2878 I'm Awesome

    Messages:
    271
    Likes Received:
    51
    Joined:
    Feb 11, 2016
    Location:
    massachusetts
    looks good
     
    ZSEVEN1 likes this.

Share This Page