Dad's '98 Resto

[98BlackSierra]

Its a bit of a story, but here goes. My dad bought a Silverado brand new in 1998 when I was 13 years old. I loved the color combo from the instant I first saw it. I learned to drive in it, spent many weeks up north camping, took ex-girlfriends to dances in high school, and made a lot more awesome memories in it. My dad passed away in 2010 and the truck was left to me. It now has roughly 155,000 miles on it. It has the 14 bolt sf and has hauled its fair share over the years. It definitely was used like a truck, but my dad loved it.

Its spent its whole life in northern Michigan, but the frame is solid. The rockers and cab corners are another story. The 3rd door is completely rotted at the bottom. Paint and body work will be hopefully this coming winter if all goes as planned. I have a used 3rd door, rear bumper, and tailgate from Alabama in the garage so no rust. Just need to locate a pair of doors now.

It was my daily driver for the past several years, but I parked it about a year when I bought my 2016. At the time a small fuel leak developed near the filler neck, but finally burst this past week when I fired it up. The end of the line rusted out so I'm going to grab a new fuel line set from linestogo.com. I have other parts I'll replace, but will post as I do the repairs.


Right after he bought it

You must be registered for see images attach

You must be registered for see images attach

Pulling it out of its rest spot for the past 2 years.

You must be registered for see images attach

The culprit

You must be registered for see images attach

How she currently looks

You must be registered for see images attach

 

[98BlackSierra]

Found this in the glove box today. Also found all the paperwork when my dad first leased it and then bought it.

You must be registered for see images attach

Finally got the tank pulled along with the filler neck. The straps had to be cut because they were so rusted. Pulled the sending unit assembly and it had bits or rust and dirt in it. I can't imagine what the fuel filter looks like since its the original.


http://s61.photobucket.com/user/1995Beretta/media/1998 Chevy Silverado Project/940DF61E-2024-45DC-8127-E2DBA94AAD9B_zpsyhx1k8jv.jpg.html]

You must be registered for see images attach

[/URL]

Eventually when I get the fuel system fixed, I will have the rust taken care of. I was hoping I wouldn't have to get a new bed since this one doesn't have the normal rust over the wheel wells. The area behind the taillights is rotted and I found a few soft spots underneath near where the bed mounts to the frame.

http://s61.photobucket.com/user/1995Beretta/media/1998 Chevy Silverado Project/FB44E9D8-1688-4EA2-BC9A-86E0E07E0E96_zpspniayf30.jpg.html]

You must be registered for see images attach

[/URL]

Rockers are shot to hell as you can see. I have new cab corners from LMC in a box for the eventual cab repair. I have a rust free third door, rear bumper and tailgate from Alabama sitting in the barn. Now I have to find rust free front doors and a bed.
http://s61.photobucket.com/user/1995Beretta/media/1998 Chevy Silverado Project/A15C6E9F-1F35-4963-B249-3D20E8B9EEEA_zps6gbf4sti.jpg.html]

You must be registered for see images attach

[/URL]

http://s61.photobucket.com/user/1995Beretta/media/1998 Chevy Silverado Project/A5BF38FB-17EA-4540-81A7-BBFEE0945E2B_zpsspsqq8ae.jpg.html]

You must be registered for see images attach

[/URL]

 

[Fragment]

Love the truck. Good luck!

 

[Biggershaft96]

Wow. I wish i could go back to 1998 and buy a brand new truck. 28k is a base model 2wd v6 work truck now lol. Nice truck btw!

 

[98BlackSierra]

Spent a little time in the barn tonight. Pulled all of the bed bolts out and surprisingly none of them snapped. Since its a northern Michigan truck, I'm almost amazed. Also pulled what seemed light a mile worth of wire out from underneath. It was running from the rear taillight all the way into the engine bay. My dad ran it years ago for something, what it was I have no idea lol.

Plan on pulling the bed tomorrow with a buddy's engine hoist. Next will be to clean the frame up and try some Chassis Saver on it. I'm waiting on my new fuel lines from Lines To Go and then I'll order a new fuel tank, sending unit, tank support, and fuel filler neck along with some of the mounting hardware.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[gstubbz]

Looks good! Make that truck nice again. I also wish I was old enough in 1998 to buy a new Silverado because I probably would have. But I wasn't even a year old so I'm 19 years late at this point lol

 

[98BlackSierra]

Looks good! Make that truck nice again. I also wish I was old enough in 1998 to buy a new Silverado because I probably would have. But I wasn't even a year old so I'm 19 years late at this point lol

That's the plan lol. I remember the day I first saw it pull into the driveway. It will be finished in my dad's memory.


Borrowed a buddy's engine hoist and pulled the bed tonight. Wasn't too difficult except my dad had messed around with the trailer wiring harness and attached a ground wire to the frame that I couldn't see. After that it was easy.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I vaccumed the dirt and rust off the frame after I took the photo. It didn't clean up bad. I chipped away at the rust on the frame and found the metal under it to be in good shape. Going to pick up some chassis saver later this week.

You must be registered for see images attach

 

[98BlackSierra]

Didn't get very much done this weekend. Pulled the rear bumper off tonight. Had a couple rusted out bolts that I had to grind off. Bought Chassis Saver on Friday so most of my time consists of using a wire wheel, grinder, and wire brush. Fuel lines came last week, ordering a new tank and fuel pump as I type this.

You must be registered for see images attach

All this rust fell out while trying to get the rear bumper off lol

You must be registered for see images attach

Any idea what this rubber line is for? Is it some sort of bleeder for the diff?

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[BerHntr]

Looks like the vent line

 

[Dylan1991_1500]

Diff breather.