Darkrider
Dexter
Two questions for ya
How much of a drop did you have on it as a long box
And how difficult were the seats to install?
How much of a drop did you have on it as a long box
And how difficult were the seats to install?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
2.5" spindles up front 4" in the back with shackles an hangers.Two questions for ya
How much of a drop did you have on it as a long box
And how difficult were the seats to install?
I don't think so,the floor under the seat in a square isn't exactly flat. Heres basically what I did. I didnt cut those brackets off the sliders like he did though.So for the seat its pretty much the same deal as it would be to go from bench to 60/40 in a bench seat 400
Well the only thing I'll be using from a square is the pedal mounting bracket so it might not be very helpful for you lolLooking forward to seeing what it will take to swap to a manual. Idly considering the idea for my '84 since I have a lead on a donor truck.