Bit of an update...
As i previously mentioned, there is no better time to swap in a new front end since the motor and diff are out of the way.
As one would imagine, the lower control arms were a treat to get out.
You must be registered for see images attach
You must be registered for see images attach
This forged LCA swap is more about just having all of my trucks being uniform than anything. That way I don't have to keep track of part differences on the fleet outside of engine/cab configuration.
- K3500 Chassis
- Hydroboost Brakes
- Forged Lower Control Arms
- Electronic Actuator
- BW4401 Slip Yoke Case
- Full Float 14B
All of the trucks at this point will have new hubs, ball joints, upper control arms, tie rods, steering boxes, idler boxes, steering shafts, brakes, brake hoses, etc. It's just a great peace of mind to know it's all new under there.
You must be registered for see images attach
Pretty bare at this point. Time to clean up and degrease.