I'd like to see pics please as I really want change the seats in my Burb.
Uploading now. Dont have very good photos because I already went back to my bench, couldnt take it anymore. Wish this thread wasnt so dead now, in terms of getting basic questions answered, like the question about the bracket pictured, and such as mine above:
honor first said:
Do pretty much any other GM bucket seats end up sitting offset to the left of the steering wheel if using the OBS factory seat bracket?
Does a bench 60/40 from a newer truck, 1999-2006 end up offset like this?
Anyways, here are the 3 pictures I have, pretty low quality.
Here is a picture that shows how far to the left you will be sitting relative to the seatbelts:
You must be registered for see images attach
This is how I sit offset to the steering wheel, sitting on the right side bolster of the Tahoe seat which isnt ideal:
You must be registered for see images attach
Can't see much here but gives you an idea:
You must be registered for see images attach
Might not seem like much, but it is enough that with my factory W/T bench, reaching the radio, etc isnt an issue. With these seats, I have to lean over to touch the radio, and I can only reach the left side of the radio; reaching the right side of my aftermarket radio to touch the menu buttons, etc is way to far.
Plus, the seats are thicker, so you are forced to either slide back a lot, and sit up straight, or slide seat forward to get a decent recline, but now your feet are cramped because they're too close to the pedals. I am 5'10" for reference.
I personally do not recommend.