I tried the wrench on a wrench thing a couple times this week, but didn't have any luck. I bought a set of crows feet today and tried using those with extensions, that didn't work either. The only other idea I have left is to put a crows foot directly on a longer ratchet and try that, or buy/borrow a longer wrench, but I'm trying to finish it this weekend, and I didn't see any at Sears when I went tonight.
Any other suggestions?
Other that that, the only progress I made was disconnect the get hose, loosen some lower intake bolts, and disconnect the heater hose from the connector. I have been able to loosen the heater hose connector, if even break it. My bigger channel locks keep locking to a bigger setting, and my smaller channel locks feel like they will break before the connector does. I tried using a 7/8 and 22mm wrench on it, but both were too small. I went out and bought a 23mm and it was too small. My buddy thinks he has a bigger wrench, hopefully he does.
Everything was going well, now these two things are holding me up, haha
Sent from my iPhone using Tapatalk