X2 that pumpkin is too close to the bed. If the bed gusset was still there it'd be resting on it. Do you have pictures of the truck how it sits?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thanks man , I also looked underneath the truck today and I noticed drop shackles in the rear There's another hole to adjust going up an inch. Looking at leaf springs there's 4 that's including the bottom load spring. So I need to replace the load spring with another longer spring ? I'm thinking of going front coilovers so I can adjust the hight and the ride.Search results for: '6658' Belltech Sport Trucks and Muscle Cars
Belltech is high quality truck and muscle car parts - Truck and SUV suspension and lowering products for muscle cars.www.belltech.com
Also Jeg's, Amazon, Summit & others have 'em.
Have to get them while they're available. May have to shop around a bit. B/T makes a run of them on a pre-determined schedule (?) so when they're outa stock, have to wait until the next go-round.
For some reason, most of the Co.'s are using the same word-for-word generic (B/T supplied?) description which is incorrect. It reads exactly the same as the one for the lower extensions. WTF?
The description is wrong.
The part number is right.
It's a bolt-on kit. Including the bolts! WooHoo!
X2 that pumpkin is too close to the bed. If the bed gusset was still there it'd be resting on it. Do you have pictures of the truck how it sits?
Yes. the rear shackles are one or two inch drop shackles. I think looking at the leaf springs I only have only 3+1, 3 leaf springs plus the Load spring.So a 5/7 ought to sit level, these trucks have about a 2" rake rear to front stock.
Your truck seems lower in the rear.
Are your shackles adjustable?
Raise it up, fix your shock angle and she'll ride.Yes. the rear shackles are one or two inch drop shackles. I think looking at the leaf springs I only have only 3+1, 3 leaf springs plus the Load spring.
Already tucked the lip so not rubbing on anything . But I'm wondering my coils are to weak or need new control arm bushings. Thinking of putting tubular control arms and coilovers..Raise it up, fix your shock angle and she'll ride.
You need to figure out what's rubbing in the front. You can roll and pull the inner fenders if it's rubbing on the lips, and run a smaller tire.
So where is it rubbing?Already tucked the lip so not rubbing on anything . But I'm wondering my coils are to weak or need new control arm bushings. Thinking of putting tubular control arms and coilovers..
At 4/6, mine still had a bit of a stink bug stance. 4/7 leveled it out.So a 5/7 ought to sit level, these trucks have about a 2" rake rear to front stock.
Your truck seems lower in the rear.
Are your shackles adjustable?