14 Bolt Swap How to

[TylerZ281500]

how much did you pay for your rear taylor?

 

[thz71]

how much did you pay for your rear taylor?

I paid 350 for the one that i put in my 98 but that came with 5.5 inch blocks 2500 springs and 2 old worn out rims and tires

sent from my outdated S3

 

[TylerZ281500]

gotcha, i paid 150 for mine with the 3/4 spriongs and 3.73s all i added was basically redid the drums, bought my chromoly shafts, lockers, gear oil and redid the brake lines and such

 

[thz71]

gotcha, i paid 150 for mine with the 3/4 spriongs and 3.73s all i added was basically redid the drums, bought my chromoly shafts, lockers, gear oil and redid the brake lines and such

Yah of i had the skills id put a locker in my 95 but sadly i dont haha

sent from my outdated S3

 

[TylerZ281500]

its super easy tbh. i still worked at the driveline shop before my back probelms so i got everything at cost, basically built me a 2grand rear for 900 bucks, shouldve opted for discs while i was there but i didnt.

 

[thz71]

its super easy tbh. i still worked at the driveline shop before my back probelms so i got everything at cost, basically built me a 2grand rear for 900 bucks, shouldve opted for discs while i was there but i didnt.

Well feel free to come do mine haha

sent from my outdated S3

 

[iEnding]

where did you get the 3/4 ton yoke's at?

 

[Kyle97GMC]

where did you get the 3/4 ton yoke's at?

The 10 bolt yoke will swap over

 

[thz71]

where did you get the 3/4 ton yoke's at?

I used a conversion U joint

 

[aaronb]

The 10 bolt yoke will swap over

I had to swap the dust shield off the 1350 to the 3r yoke to get It to fit right.the 3r's shield wouldnt clear the snout on my 14 bolt.
Its easy to swap them over. Just had to knock it off with a hammer and punch. Then used an oversized socket and a hammer to reinstall.