HerpDerp1919
I'm Awesome
I was messing around under my trucks as I'm getting ready to swap the 4L80 out of my K2500 into my K1500. I have the 14 bolt under my 2500 and the 10 under my 1500. Would I be able to swap the rear axle out of my 2500 into the 1500? I did some measuring and it looked like where the leafs mount up is the same distance on both axles. I read somewhere about moving spring perches. But both axles have two it looks like
Shock mounts also measure up the same. So my next question is if this axle will work, would I be able to use the axle shafts off my 1500 to keep all four wheels six lug or could I use the knuckles up front from my 2500? I did some comparing and it doesn't appear that anything up front will swap over.
My main reason for all this is that maybe everything will agree when I do my 4L80 if I just swap over the whole drive line
You must be registered for see images attach
Shock mounts also measure up the same. So my next question is if this axle will work, would I be able to use the axle shafts off my 1500 to keep all four wheels six lug or could I use the knuckles up front from my 2500? I did some comparing and it doesn't appear that anything up front will swap over.
My main reason for all this is that maybe everything will agree when I do my 4L80 if I just swap over the whole drive line