Recent content by 98silveraydo

  1. 9

    No Brakes Lights Thread #172569

    I’ve tried going through the threads with no brake lights and couldn’t find what I was looking for. I have a 98 K1500 5.7 reg cab short bed. Symptoms: Third brake light works, tail lights work, front turn signals hyper flash, rear turn signals do NOT work. I have replaced the boards in the...
  2. 9

    SAS Question

    I've almost got the axle stripped down, just gotta get the knuckles off. I've been knocking on the screws with a hammer to knock em out but I've just been smushing the screws. I guess ima just get a bigger hammer. I am now starting to build it up, but I have a few questions. So am I keeping the...
  3. 9

    SAS Question

    Sweet, and I was planning on getting the brackets as well as crossover steering from off road design
  4. 9

    SAS Question

    Okay, lift springs are what I’m looking for. Would I look at lift springs for a 73-87?
  5. 9

    SAS Question

    Hey guys, how do you find a lift kit for your sfa? I have a 78 ford Dana 44 with 47” leaf springs off a Chevy. Am I just looking for any kit with 47” leaf springs? Wanna make sure I order the right thing the first time, thanks.
  6. 9

    Broken shift selector

    Found out how to add pictures :). And i don’t see that piece included here but it could be where I can’t see. I guess what ima do is go to the junkyard and find out where it’s from on another truck.
  7. 9

    Broken shift selector

    Soooo, I got into my truck after work today, try to bring the park down and a piece hits the floor and I have total play in my lever. I tried to take it apart but I didn’t have a torx with me so I just got a ride with a friend. I’m going back tomorrow but I wanna see if anybody else knows...
  8. 9

    Alignment Issues

    I found out my wandering, the plastic bushings on my sway bar link have gone out, you can basically throw it up and down and however while it’s sitting there. Maybe that could be something to check. It has a lot of play on the highway when I get up to speeds. This is from adjusting my ride height.
  9. 9

    Alignment Issues

    I’m having similar issues, I just got my alignment done about a week ago, it was good and tight, then I took my tires off and did the brakes, and now I wander, pulls right sometimes and I don’t want this to happen everytime I have to take the tire off
  10. 9

    1500 Pads and 2500 caliper

    Bump
  11. 9

    1500 Pads and 2500 caliper

    Bigger caliper piston, it’s a direct fit.
  12. 9

    1500 Pads and 2500 caliper

    Well the brakes have been on for a few days now and they do fine, still a little squishy, but definitely stop better. New brake booster is next. when I got to looking at my old calipers and pads, the pins were the same too. Shoulda looked before I asked. Weird thing though; I got my truck...
  13. 9

    1500 Pads and 2500 caliper

    just put 1500 pads on 2500 calipers but the shiny pins on the pads that sits in the holes on the caliper doesn’t fit all the way. It still sits in there, just not flush, any reason, do I need 2500 pads? I read somewhere you could do it this way
  14. 9

    Rear end hop under normal breaking

    Mine was because of the rotors being warped. Also wheels being on too tight
  15. 9

    Torsion Keys Uneven?

    So I got 285s on and I can’t turn all the way without rubbing. On the drivers side, it rubs the front, on the passenger side, it rubs the back. I was going to turn up my torsion keys cuz they’re not turned up at all and the first thing I noticed was that one bolt hung way lower than the other...
See more

Latest posts

Staff online

Members online

... and 6 more.
Total: 1,308 (members: 56, guests: 1,252)

Forum statistics

Threads
64,535
Messages
1,396,102
Members
51,935
Latest member
jeremy99

Share this page

Top