Texcuda
I'm Awesome
The 60e is headed out the door. Rather than deal with a mediocre piece of ****, I'm going to swap in a 80e. I have most of the wiring figured out (swap white and brown wire at the trans connector, add ISS wiring, etc). My truck is now carb'd, but the stock computer is running the 60e with a remote TPS setup.
Will the 60e computer run the 80e (my hunch is no, but you never know)?
93 has the stand alone DRAC. If I have to get a computer from a donor, does the year model matter in regards to the DRAC and speedo operation?
The info I found for the ISS wiring is generic in regards to year models it is good for. The info I have says, "Pin A --> Pin 22 & Pin B --> Pin 23 on the Green/Red Connector". Does this apply to all year models? TBI, CPFI, and LS up?
Will the 60e computer run the 80e (my hunch is no, but you never know)?
93 has the stand alone DRAC. If I have to get a computer from a donor, does the year model matter in regards to the DRAC and speedo operation?
The info I found for the ISS wiring is generic in regards to year models it is good for. The info I have says, "Pin A --> Pin 22 & Pin B --> Pin 23 on the Green/Red Connector". Does this apply to all year models? TBI, CPFI, and LS up?