What do I do with my Evap System?

[Rick1991]

google rwal removal/delete and you should find info on removing the RWAL (Rear wheel anti lock) easy to do just go to a hardware store.

Ya I kind of came up with some info on that. What happens if I where to just unplug the wire from the proportioning valve and the module and that's all I did?

 

[Rick1991]

You must be registered for see images attach

The wire that goes to the proportioning valve is part of the engine harness, can that just be left off?

 

[SkyHighColorado]

Yeah I don't think it would hurt anything but if it were me and I wanted to disable it I would pull the abs fuse.

 

[Rick1991]

Yeah I don't think it would hurt anything but if it were me and I wanted to disable it I would pull the abs fuse.

Well like I probably wouldn't touch it.. but the RWAL harness is attached to my engine harness so I might as well delete it instead of tracing it through my engine harness and having another thing to deal with ha.

 

[hybrid1]

When I did my truck I removed all loom and pulled all wires that I knew were not necessary to the swap. Same with the 5.3 harness. I then married them together to look stock

You must be registered for see images

Oddly enough this is the only finished pic I have of my swap


Sent from my iPhone using Tapatalk

 

[hybrid1]

All of the engine wiring is tucked under the fuel rails and some running under the engine cover.

I kept my factory fuse box and rewired it for the new engine and PCM. I also rewired the junction block on the firewall for any wires needing to go through into the cab. Your wiper wiring shouldn't need to be messed with as far as I know


Sent from my iPhone using Tapatalk

 

[SkyHighColorado]

dude that looks clean as hell. I am feeling all jelly.

 

[hybrid1]

Lol thanks, I have a lot of work into the wiring. It's still not completely done though. I would like to eventually get the coils hidden and some new valve covers


Sent from my iPhone using Tapatalk

 

[Rick1991]

Lol thanks, I have a lot of work into the wiring. It's still not completely done though. I would like to eventually get the coils hidden and some new valve covers


Sent from my iPhone using Tapatalk

Just wondering what fittings you used for your fuel lines? I got the corvette fuel filter/regulator, but if you know the size from the factory line to the filter and then from the filter to the fuel rail I would appreciate it.

 

[hybrid1]

I used the return style fuel system. But let me look at my part numbers for the trucks fuel fittings


Sent from my iPhone using Tapatalk