been to many a junk yards and ive never seen this in person, but i digress.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
One difference is that the Tahoe rear will probably have a rear sway-bar, correct guys?
so is the 14 bolt as wide as the z71 rearend? I need it as wide because the lift spindles are going to make the front wheels stick out
been to many a junk yards and ive never seen this in person, but i digress.
I believe the 14 bolt is a little wider than the z71 rearend because i was thinking about putting one on mine someday to match the front track width. Someone correct me if wrong.
Your front track width is the same as it was from the factory since the RCX lift is a full drop kit and not a knuckle kit so your front and rear widths are the same... (someone correct me if I'm wrong). There's no need for you to have a wider rear end to have to match a wider front since your front is no wider than it was before your lift.
The front track width is ~1.5" wider than the rear from the factory. Also, typically with a lift you change wheels to something with different offset/backspacing, changing track width