Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
transfer case is not bolted to the trans, both trans and tcase use seperate crosmmembers and both are connected by a driveshaft between them. if your running alot of lift you could also try to clock your tcase so your angles to your rear end arent so steep.
a T56 is a 2WD transmission. It will not bolt up to a transfer case. You can run a divorced transfercase set up like said above and make it work for a 4x4.
But yeah, it is possible.