Shaking

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Blockbeata09

Newbie
Joined
Oct 11, 2016
Messages
21
Reaction score
2
Location
Ohio
I have a 97 k1500 5.0, I have changed the plugs, wires, coil, fuel filter, Pcv and put on a cold air intake. My problem is when I'm driving at highway speeds and I let off the gas the truck wants to shake and not go. The check engine light comes on for a few days and then goes off. Sometimes when I start going up a hill it shakes. I can't figure it out. I had the PCM checked with a snap on code reader and it shows a miss fire but when they had it hooked up all cylinders where fine? Please someone help me out or point me in the right direction thank you.
 

Blockbeata09

Newbie
Joined
Oct 11, 2016
Messages
21
Reaction score
2
Location
Ohio
I don't know what other things it could be. Has new plugs, wires distributor, rotor button and Pcv. The last thing I want to do is injectors because I'll have to have a shop do them. I don't trust myself to do that job.
 
Top