Power seat question

[SS Performance]

I am installing the bucket seats and console out of a 2017 Silverado into my 1996 Silverado, with power bucket seats.

My question is does anyone know the part number for the electrical plug and pins for the 1996 Silverado? I want to hook up the power adjustments in the 2017 seats to the stock harness in the 1996.

Thanks
Craig

 

[JOHNGAAA1]

OBS Outpost on youtube.

 

[SS Performance]

OBS Outpost on youtube.

Tried them, real nice guys, but they couldn't help me. The suggested cutting the connector off my existing seats and wiring it into the new seats. I'm trying to avoid that if possible.

Thanks
Craig

 

[GoToGuy]

Look in the service manual. In the electric section along with operation/ testing, wiring diagrams, wire locations, ground locations, type connectors, end views of all connectors and part numbers. It's all there. Section eight.
Good luck.
Packard, weather tight connectors were spun off to " Aptiv " electric corporation.

 

[SS Performance]

found the connectors;
Part numbers
12129135 & 12129136
12129135 is for the body harness and 12129136 is for the seat harness. these can be purchased individually.

Part number 12129157 is for the secondary lock. Its required.

The pins are a bit more difficult because the pin part number changes depending on the wire gauge. The smallest quantity I found was packages of 50. These are not the exact pins and are a little different. They have the longer tabs like a weather pak connector but these plugs do not use the rubber seal.
For the body side
12077413 12-10 guage
12129493 16-14 gyage
12077411 20-18 guage

For the seat side
12048254 12-10 guage
12129497 16-14 guage
12048159 20-18 guage

If I can find better info on the pins I will add it.

Thanks
Craig