silverado98
slab holiday
just trying to see some ideas think of doing a 2 inch drop but im not sure on my 98 ecsb. thanks guys love this site by the way its been alot of help
pics of 2 inch all way around on 20s
- Thread starter silverado98
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
silverado98
slab holiday
no one just a 2 inch drop
sewlow
Bitchin' Stitchin'
My blue '97 in the sig. is @ 2/4. (on 17's)
sewlow
Bitchin' Stitchin'
...on 20's.
You must be registered for see images attach
silverado98
slab holiday
is that front and back and what brand do u have and did u use coil springs or drop spindles and what bout therear
sewlow
Bitchin' Stitchin'
2" front, with drop spindles.
4" rear. 2" drop front hangers & 2" drop shackles.
The driver side hanger install is amjor PitA with the box on.
You'll need to check the pinion angle after. More than likely, you'll need a wedge to bring the nose of the dif back up. Usually the slimmest wedge works.
With that, you will also have to extend the the centering pin in the spring pack.
A longer bolt with a nut cranked down to the head & then rounded off to match the bolt head's diameter will do.
4" rear. 2" drop front hangers & 2" drop shackles.
The driver side hanger install is amjor PitA with the box on.
You'll need to check the pinion angle after. More than likely, you'll need a wedge to bring the nose of the dif back up. Usually the slimmest wedge works.
With that, you will also have to extend the the centering pin in the spring pack.
A longer bolt with a nut cranked down to the head & then rounded off to match the bolt head's diameter will do.
Similar threads
