TruckinAin4Sissies
L.E.D. Whisperer
I've been in the process of replacing ALL my front-end (steering) components, all I've left to do is the Lower Ball Joints.
I'm wondering if I could do the following to get the LCA's off:
* Remove sway bar (replace rubber bushing/end link)
* Remove the 2 bolts attaching LCA-Frame
* Remove bolt from LCA-Tie Rod
Or am I wrong?
I'll be tearing this b¡tch apart this weekend, alignment on Monday.
-Truckin-
I'm wondering if I could do the following to get the LCA's off:
* Remove sway bar (replace rubber bushing/end link)
* Remove the 2 bolts attaching LCA-Frame
* Remove bolt from LCA-Tie Rod
You must be registered for see images
You must be registered for see images
Or am I wrong?
I'll be tearing this b¡tch apart this weekend, alignment on Monday.
-Truckin-