eisterd
Newbie
- Joined
- May 15, 2014
- Messages
- 8
- Reaction score
- 0
I'm hooking up a trailer brake controller to a 98' Silverado, that I bought not too long ago. The previous owner, at one time, obviously had a brake controller hooked up but, he left little signs of how.
The black and blue are run through the firewall, with wire loom around them, he's got the 2 (black and orange) connected to the posts on the under hood fuse box but, I can't tell where he had the red (brake light) wire attached, or the ground. There's NO sign of a ground run outside the cab for it, and no sign of any wire having been attached for the brake (red from controller)
Any ideas??
Thanks
The black and blue are run through the firewall, with wire loom around them, he's got the 2 (black and orange) connected to the posts on the under hood fuse box but, I can't tell where he had the red (brake light) wire attached, or the ground. There's NO sign of a ground run outside the cab for it, and no sign of any wire having been attached for the brake (red from controller)
Any ideas??
Thanks