Bagged and bodied 99 c3500 build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Erik the Awful

Supporting Member
Supporting Member
Joined
Aug 9, 2019
Messages
7,474
Reaction score
15,160
Location
Choctaw, OK
I had thought about laying it down but I didn't know if it would be bad for it with the oil.
That's a problem with refrigerators, where the oil is captured in a system that flows the refrigerant back into the inlet of the compressor. Since fluids don't compress, oil in the inlet can trash the compressor. In a shop compressor, the air going into the inlet is ambient air. The oil is kept separate. It's not an issue.
 

ROYALTYFORGE

I'm Awesome
Joined
Apr 8, 2023
Messages
324
Reaction score
938
Location
Iowa
So it's been awhile, but I've been doing alot if thinking and planning things out.
For the body drop I pan to make the frame front the firewall back. I started laying everything out in a 3d model so I can wrap my head around things. Still not very good with the program but you may get the idea. More things to figure out and add to the model, but I thought I would share
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 
Top