Search results

P1870

No problem. I believe when Hodges is referring to $200 that is the reamer cost as well, which will definitely get ya on cost (I've seen them on sites from $80-130) considering you will only use it once so its an expensive one time use. However if you can find a shop that rebuilds GM...
- 99COOP
- Post #20
- Dec 18, 2009
- Forum: Transmissions
P1870

it is the TCC valve, and the cause is usually from a worn regulator sleeve and or a worn valve body bore. When installing a new one I would suggest replacing it with a new TCC regulator valve and sleeve but this also requires a reamer to drill out the existing valve bore...
- 99COOP
- Post #16
- Dec 16, 2009
- Forum: Transmissions
FSC transfer!

awesome truck, glad you did the body work to get it back to where it sits now.
- 99COOP
- Post #5
- Dec 16, 2009
- Forum: Member Trucks
new to here but not to gm trucks

good looking truck, must have a pretty high payload as well considering your hauling a pontoon boat in the bed j/k.
- 99COOP
- Post #12
- Dec 15, 2009
- Forum: Member Trucks
P1870

you will get mixed reviews, but for the most part it reduces wear on the clutches, reduces the slip to create a firmer shift which prolongs transmission life, and reduces temps. But a lot of shift kits are just a whole bunch of springs, valves and BS. If your building up your valve body for a...
- 99COOP
- Post #13
- Dec 15, 2009
- Forum: Transmissions
New Guy

awesome looking truck, clean as hell too.
- 99COOP
- Post #10
- Dec 15, 2009
- Forum: Member Trucks
new guy

looks sick, thing is clean !
- 99COOP
- Post #4
- Dec 15, 2009
- Forum: Member Trucks
new from fsc 97 tahoe

nice tahoe, and nice pictures as well.
- 99COOP
- Post #16
- Dec 15, 2009
- Forum: Member Trucks
Teh Hoe

good to hear, looks like the true trac will be going into my 14 sf swap this winter.
- 99COOP
- Post #7
- Dec 14, 2009
- Forum: Member Trucks
Teh Hoe

nice, should be sick with the sas. did the trutrac fail, or 10 bolt housing/axle shafts ?
- 99COOP
- Post #3
- Dec 14, 2009
- Forum: Member Trucks
thArf (mike) I need a video to go with this picture!

probably assisted in the demise of the 10 bolt, lol.
- 99COOP
- Post #11
- Dec 11, 2009
- Forum: Member Trucks
Coming over from TYF.

Welcome!
- 99COOP
- Post #5
- Dec 9, 2009
- Forum: Member Trucks
my 99' lifted Tahoe

thanks, Sanded the chrome as best i could, which is a pain in the ass. But the idea is not to remove the chrome cause you wont by sanding, it was just to scratch the surface up, then use a self etching primer (2 light coats) followed with light 600 grit sanding and then 2-3 coats of color and...
- 99COOP
- Post #26
- Dec 8, 2009
- Forum: Member Trucks
GMT400 Lift Guide

^ thats what i was wondering cause they seem to be close to the bottom of the fender and i thought thats alot of lift for them to be 37's.
- 99COOP
- Post #25
- Dec 8, 2009
- Forum: Stock Suspension + Bolt On Kits
my 99' lifted Tahoe

Love em, i go through tires every year (cause i always end up goin bigger) and would buy these again if i can find the size i want. hahaha, thanks
- 99COOP
- Post #23
- Dec 7, 2009
- Forum: Member Trucks
GMT400 Lift Guide

Awesome !! However specs on the 2dr black tahoe are required needed. (8th to last photo)
- 99COOP
- Post #20
- Dec 7, 2009
- Forum: Stock Suspension + Bolt On Kits
Another member from GMFS, here is my Yukon...

Awesome!! Do want.
- 99COOP
- Post #8
- Dec 7, 2009
- Forum: Member Trucks
SAS or NOT!

Yea like Bama said your best to just go w/ an rcx, which is a great kit. Your not going to SAS for 1000, and you wont be happy with a poorly fabricated setup. Sometime down the road with proper funding and parts collecting you will be able to do it, just as i plan too!
- 99COOP
- Post #16
- Dec 7, 2009
- Forum: Stock Suspension + Bolt On Kits
my 99' lifted Tahoe

^thanks guys. Yea funny how nice a black can of spray paint will make the underside look. 35" cooper stt's on 16x8 Cragar soft 8's. soon to be 37's on 17x9's
- 99COOP
- Post #20
- Dec 6, 2009
- Forum: Member Trucks
99' 4dr tahoe build

Starting with stock form (Winter 2008) Few months later, a leveling kit and 33's (spring 2008) Bodylift install (spring 2009) I've heard of cali lean and texas rake, but dont think i know i name for this pulling through transmission cable Bumper refinishing New rims and...
- 99COOP
- Thread
- Dec 5, 2009
- Replies: 0
- Forum: Offroad Build Threads
Big Black from a while ago

truck looks awesome! but what happened to the tailgate ?
- 99COOP
- Post #6
- Dec 5, 2009
- Forum: Member Trucks
14 Bolt SF Project

the down side to having the 2wd axle besides running spacers is that you have to cut the spring perches off and relocate them, as well as the shock brackets. Compared to the 4x4 which is just a drop in for the obs.
- 99COOP
- Post #20
- Dec 5, 2009
- Forum: Axles + Brakes
Michigan New Guy

truck looks good, would look awesome lifted too
- 99COOP
- Post #8
- Dec 5, 2009
- Forum: Member Trucks
14 Bolt SF Project

well atleast you saved yourself from some aggravation down the road.
- 99COOP
- Post #16
- Dec 4, 2009
- Forum: Axles + Brakes
Gettin the 22s muddy pullin out stock f250

i would say yes, however the only thing that stops me is the 22's. I just prefer a little less rim, out of curiosity are you looking to sell as a whole or separate ?
- 99COOP
- Post #4
- Dec 4, 2009
- Forum: Offroad Chat / Trail Ride Reports / Carnage