Search results

  1. A

    LEDs, Resistors, Flashers - Should I just give up?

    I figured it out needed ballasts
  2. A

    Are Tubular upper lower arms available (stock height) for 2wd 88-98

    I had also thought I saw lower arms somewhere that did away with the press in style ball joints .. might be wrong on that
  3. A

    Are Tubular upper lower arms available (stock height) for 2wd 88-98

    Because my bushings are worn .. and I’ve invested a ton in the suspension if I was to do new and if they were available I would do the tubular just to do it …
  4. A

    Are Tubular upper lower arms available (stock height) for 2wd 88-98

    I haven’t been able to find out if there are any vendors out there that offer Stock tubular upper and lower arms (no lift) (no drop) stock height eBay google just might be over looking For 2wd 88-98 Upper and lowers A tubular lower that still accepts a coil spring not a coilover setup
  5. A

    '97 Steering Gearbox Replacement Guidance

    But how much of that is Say so” or believable .. I mean we don’t know what they see. Any company can use anything as a say so situation to avoid having to pay out core costs. As a consumer you gotta just say ok I agree or fight about it. Same goes for trans repair business .. we just never know...
  6. A

    '97 Steering Gearbox Replacement Guidance

    I only said that because they have offered many a solid working box In terms of being hassle free working like they should… outside of the core refund issue .. which i agree is not cool.. Borgeson isn’t always mentioned much on Here as much like you’d think they would be..so I mean I...
  7. A

    '97 Steering Gearbox Replacement Guidance

    Go redhead even if you don’t get your core refund .. it’s our best bet offered out there for these trucks … and the 96 ps pump swap you won’t regret The evo is junk ! Good luck on your build
  8. A

    '97 Steering Gearbox Replacement Guidance

    The best bet at this point is to just invest 1000% in the best of the best Redhead box / Cunningham solid U-joint steering shaft / mevotech Ttx tie rods / moog pitman and idler arm and definitely opt for a 96’ year model Ps pump and 96’ year pressure hose and by pass all the evo junk if you...
  9. A

    '97 Steering Gearbox Replacement Guidance

    Does this general rule of avoiding the 12:7:1 quick steer box apply the same to 5/7 drop 1/2 ton trucks .. or at that point does it not matter . I do know that redhead mentioned on a call that the 12:7:1 is not recommended for lifted trucks. I am in the next stage of adding a new blue or...
  10. A

    Stuck with Solid blinkers once I added New led corner markers ?

    I use a Ibrightstar brand on everything so far so good
  11. A

    Which drop kit for the front?

    With drop A- arms you gotta be careful with pavement scrub with A-arms they sit lower and it can be an issue usually only if your going with additional drop components on top of all that. Plus if your staying with a 15” wheel tire size it makes everything sit a lot lower to the pavement. If...
  12. A

    Stuck with Solid blinkers once I added New led corner markers ?

    I to agree I was on to that hint … for some time .. which is why I stayed with bulb type tail lenses of all the things possible .. I kicked the led tails I can’t justify 100-300$ and then your done when they go out .. but I think a 5-9$ set of 3157 led bulbs of Amazon once a year or maybe 2...
  13. A

    Stuck with Solid blinkers once I added New led corner markers ?

    Got it all fixed up ! Flashing like it should … And the resistors were 16$ a set. Thanks for the input and help !! The only I guess minor thing I noticed is they all dont blink in sequence between the park lamps and corners . They however do blink in sync only with the….. Headlamp switch...
  14. A

    Stuck with Solid blinkers once I added New led corner markers ?

    Got the parts …so This looking like what you said to do ? I wired one end of the resistor into the (Driver) Lt blue wire on the 194 plug The other open end am gonna terminal ring and tap screw to core support ground - Nothing is actually being hard wired into the corner marker plugs I’m...
  15. A

    Stuck with Solid blinkers once I added New led corner markers ?

    S Sorry I just yanked it out and someone did already put in a ep29 smh… This truck had aftermarket led Cluster bulbs when I got it . But never had led tail bulbs or fronts . So I guess I just need to grab two resistors
  16. A

    Stuck with Solid blinkers once I added New led corner markers ?

    Would a work around be putting standard reverse bulbs back in? Would that gain way for the LED corners to function ? Do you mean a load resistor as in One of these ? They sell them on Amazon or at local auto parts. Do I need one one each LED marker or just one (resistor) per pair per side...
  17. A

    Stuck with Solid blinkers once I added New led corner markers ?

    So your saying with a stock flasher relay ‘which that’s what I have not the one designed to fix hyper flashing that you can grab at the local auto parts. Plus with me having LED 3157 tail bulbs and led reverse bulbs and two front amber Led parking lamp bulbs . That is why whjw I turn my...
  18. A

    Stuck with Solid blinkers once I added New led corner markers ?

    I have a stock flasher relay in my junction box under the dash and I have LEDs in tail back up and both front parking signals I get zero hyper flash None .
  19. A

    LEDs, Resistors, Flashers - Should I just give up?

    Might you have insight on my issue with my post . I have perfect working rear tail and front parking LEDs I added a set of the LED corner side markers that direct plug into the 194 socket and I get a solid light on all the corners and front parking lenses with the headlight switch turned on...
  20. A

    Stuck with Solid blinkers once I added New led corner markers ?

    The LED corner markers are just parallel wired together So they have you as shown plug right into your 194 pigtail . I know they flash and function .. it’s something when you turn the headlights to running and or fully on.
  21. A

    Stuck with Solid blinkers once I added New led corner markers ?

    Pretty sure ya it’s a black squared flasher relay box Problem is when I turn the headlight switch to parking or fully on That’s when nothing flashes the relay box don’t make its noise . The lights all stay solid , until I turn the headlight switch back to off !
  22. A

    Stuck with Solid blinkers once I added New led corner markers ?

    So this is strange … I did a pic and tutorial on my lense tint and Led corners yesterday. After testing them in the (day) with the headlight switch off all was good t . The LED corners blink accordingly with the parking lenses only when I have the ( Headlight switch off). As soon as I turn to...
  23. A

    Interior metal door panel hardware

    Suggest Lmc truck ! If you want the right hardware . Or eBay search Or just go to a yard and pay 5$ for the entire panel and clips . Once you do these doors enough you’ll know how to tear them down and back in no time .
  24. A

    Interior metal door panel hardware

    Yup I agree with @someotherguy …that’s the issue . I just did all my actuators and lock rods and door handles .. that 10mm is easy forget to put back .. I forgot one time and never again down behind the door speaker . That or it’s been forgotten before by previous owner . Speaking of I need to...
  25. A

    Parking and LED corner marker (Amber Tint ) making things unique

    The end result really puts a 90s truck back into the 80s IMHO it’s a nice touch that’s different . If you’re looking for the look I’d recommend to give it a go. It brings the visuals and illumination of the turn signals to Life with amber lenses. I thought I’d show the final touch and steps...

Latest posts

Members online

... and 16 more.
Total: 1,663 (members: 66, guests: 1,597)

Forum statistics

Threads
64,529
Messages
1,396,033
Members
51,924
Latest member
whewshikaw

Share this page

Top