Search results

  1. M

    Heavy duty harness + 4 hi mod wiring diagram!

    What gauge wire should you use? Also do you need a fues between the battery and relays? If so how many amps?
  2. M

    Disc conversion for 10 bolt

    I put disks on my 91 K1500 back in 94. I used some GM metric calipers, It was not worth the investment it did not make a noticeable difference in the stopping.
  3. M

    Help!!! Shutting off issue

    I agree with Schurkey most likely when the engine gets warm and goes into closed loop operation not having the O2 the engine ECU will most likely lean out or richen up until it stalls.
  4. M

    1989 chevy k2500 clutch recommendation

    I replaced the clutch on my 89 K1500 years ago. I did remove the transfer case for the transmission so I did not have to remove the crossmember and torsion bars, the transfer case main bearing does sit in a plastic retainer if you do remove the transfer case be careful that you don’t break it. I...
  5. M

    1989 Chevy 2500 4x4 350 starting and running issues

    See attached file for information on GM VATS. Sent from my SM-G935V using Tapatalk
  6. M

    1989 Chevy 2500 4x4 350 starting and running issues

    Check your fuel pressure. Sent from my SM-G935V using Tapatalk
  7. M

    Replacement headlights

    I installed some lights about 5 years ago from LMC. One is a fish bowl filled with water and both have yellowed really bad. Sent from my SM-G935V using Tapatalk
  8. M

    Dash Command App

    I use it! Sent from my SM-G935V using Tapatalk
  9. M

    95 Tahoe troubleshooting slight surging

    Check your fuel pressure also. Sent from my SM-G935V using Tapatalk
  10. M

    Fast turn signal - not the bulb!

    1157, 2057, 2357 etc... have different resistance. It could cause a fast blink issue. Make sure you have the correct bulb. Sent from my SM-G935V using Tapatalk
  11. M

    Apps that read CMP Retard Offset?

    Dash Command does you have to purchase the GM parameter $9.95. Torque won't do it. Sent from my SM-G935V using Tapatalk
  12. M

    97 Chevy Silverado k1500 keyless/remote start install?

    I installed a Viper remote start on my truck. I purchased it from Crutchfield which I highly recommend because they can provide you with wiring diagrams and tech support if you run into problems.
  13. M

    Bent Axle? [Video]

    Have you had the drive shaft balanced? Also make sure the drive shaft has its correct phasing. Sent from my SM-G935V using Tapatalk
  14. M

    Freshly Rebuilt 350-Crankcase full of coolant

    Some of the head bolts are in the water passages and need sealant. Sent from my SM-G935V using Tapatalk
  15. M

    White peeling paint question

    I had a white 89 in 96 the local chevy dealer repainted mine under warranty, they had the whole truck media blasted down to bare metal. Sent from my SM-G935V using Tapatalk
  16. M

    98 K1500

    It's a K1500 4x4 I replaced the one on my 92 blazer but it was lifted and I was able to replace the gasket just not sure on stock suspension.
  17. M

    98 K1500

    Can you replace the oil pan seal with the stock suspension?
  18. M

    98 K1500

    I inherited my father's truck after he passed away. Right now it runs good but every seal on the lower end leaks. Timing cover, oil pan, rear main, oil cooler lines, ectopic. It has about 130000 miles. I'm planning on pulling the engine this summer to reseal but I'm wondering if I should do...

Latest posts

Staff online

Members online

Total: 1,935 (members: 49, guests: 1,886)

Forum statistics

Threads
64,366
Messages
1,392,330
Members
51,500
Latest member
Prokiton

Share this page

Top