Unfortunately yes, that’s why I’m getting so frustrated. The alignment is constantly off from the smallest of bumps, then once I check everything, it’s cambered in and on the verge of destruction. My balljoints last alittle longer then the tire rods. But iv has the truck for alittle of 50k and...
Wondering if anyone could lend some advise about how to beef up the the old 1500 independent suspension.
4” Suspension lift w/ 35/12.50 on stock 16x
Honestly getting tired of constantly replacing Balljoints and Tie rods (Yes I knew wear and tear would arise from lifting the truck) just...
Thanks man! And no trimming at all but if I turn literally all the way (Which you shouldn't do any way) it rubs on the lower control arm. So as long as you don't turn all the way your golden.
Sent from my iPhone using Tapatalk
Here is 4" on 35s it's all up to you. I would imagine 6" on 33s will put a lot of strain on your control arms and tie rods.
Sent from my iPhone using Tapatalk
I know that the gmt800 mirrors fit but are there any newer models with the led turn signals able to fit? I know I'll have to wire the turn signal wire in with my turn signal which isn't a problem just looking for a newer style towing mirror.
97 k1500
Sent from my iPhone using Tapatalk
One question I wanna know, I have the 4" Rcx and was wondering if going to the 6" would require any additional pieces that doesn't come with the 6" kit. Brake line extensions,etc.
97 K1500
Sent from my iPhone using Tapatalk
Okay I was going to say I wouldn't recommend filling huge dents with bondo it will eventually crack if it's too thick, a lot of the guys are around here 100 grit their little dents, but if your gonna get them all the way out I would say try to work it from the back side before you wipe it. It's...