Recent content by Dnytro

  1. D

    Socal LS Swap -Smog legal

    For questions sake, a 94 Tbi doesn’t have a obd2 system to check, it’s going to get ran on the rollers. An Ls swap with cats should pass 1994 Tbi v8 thresholds no problem, so what’s the reason to go to a referee and get permanently flagged for something silly like not having an air injection pump?
  2. D

    Really weird misfire issue

    To wrap up the thread, the New maf was bad, and the camshaft sensor was bad. Runs smoother than I remember lol
  3. D

    How to bag that truck of yours

    If all bolts are tight, The only deflection you’ll get is from those skinny tubes flexing or the bushings. Flipping that upper wishbone bar around won’t do anything it’s not already doing now. Its just a triangulated 3 link, which is done all the time. It could be beefier (it’s on a big truck)...
  4. D

    Really weird misfire issue

    I know it’s hard to read a thread when it becomes multiple pages but currently the correct 20amp fuse is in there, I did that before I replaced the cap and rotor. The cap and rotor is what caused the misfire code and the felt misfire to go away. If I pull the fuse, it’s hard to start and I get...
  5. D

    Really weird misfire issue

    I’m not sure what initially blew the fuse, but I put the 30amp bcuz I ran out of 20’s Currently the truck runs good. Just trying to get the misfire counts bcuz maybe it’s still there but not enough to trigger a code. It also has the old spider so I may change that soon
  6. D

    Really weird misfire issue

    ^^^^^ I agree but It had one sentence mentioning misfire in all 108 pages of the manual and I can’t get it to actually show on the scanner itself. I’m still looking for something else but it could be user error I guess.
  7. D

    Really weird misfire issue

    There wasn’t a manual, just a quick start guide. In searching, it looks like this one doesn’t show misfires. There were 25 lines, as u scroll down it say 1/25, 2/25, etc. I tried to capture all 25 lines.
  8. D

    Really weird misfire issue

    Which autel scanner? I’m gonna send this one back, it doesn’t have the option to show misfires.
  9. D

    Really weird misfire issue

    Still no issues with the truck but I bought a innova 6100 and while it has live data I doNt see misfires. Am I missing something?
  10. D

    Really weird misfire issue

    Still waiting for scanner suggestions but I couldn’t sit by and do nothing so I checked compression, spark at plug wires, checked all plugs, checked fuel, all the other free stuff that takes awhile to check. Everything seemed good. Went ahead and bought a new cap and rotor (only thing I...
  11. D

    Really weird misfire issue

    I pulled a few plugs, seems there is spark, and there is gas. Drives ok, doesn’t stall, isn’t hard to start. But I feel the miss and the code is there. This tool sufficient for reading misfires? Or anyone have good luck with something I can get quickly(like amazon quick)? INNOVA 3040RS, OBD2...
  12. D

    Really weird misfire issue

    Ok as stated, I saw no frayed wires. Replaced fuse with a 20 amp, didn’t blow. Still p0300 code.
  13. D

    Really weird misfire issue

    I don’t have misfire counts, I never pulled the trigger and bought the tech 2 tool.
  14. D

    Really weird misfire issue

    O2 sensor wires all good, maf wires good, camshaft position wires good, gotta run to oreillys to get more 20amp fuses to test. Cap and rotor looked ok, no cracks or excessive build up that I could see.
  15. D

    Really weird misfire issue

    That diagram is really helpful, gonna get some more fuses and report back asap
See more

Latest posts

Staff online

Members online

Total: 1,732 (members: 45, guests: 1,687)

Forum statistics

Threads
64,475
Messages
1,394,718
Members
51,752
Latest member
moverton05

Share this page

Top