Recent content by Dekarson
-
D
Gauges specs?
Dont have them anymore? So which ones are original?- Dekarson
- Post #3
- Forum: OEM and Custom Interiors
-
D
Gauges specs?
I have made a om606 swap in my 1989 k1500. I have some problems with the heat and oil pressure. Do you know what sender I need to make it work. Ohm for oil and heat for k1500.- Dekarson
- Thread
- Replies: 3
- Forum: OEM and Custom Interiors
-
D
Gap bed and cab?
Hi Can anyyone tell me how wide the gap between the bed and cab should be on gmt400 shortbed std cab. Im starting to put me car back together now.- Dekarson
- Thread
- Replies: 1
- Forum: Paint / Body / Detailing
-
D
5 bolt conversion k1500?
yes a want super special 5 lug unicorn rims, but a spacer is 2" to wide for them. So thats why im going to drill a 5 bolt pattern insteed. If there isnt a easier way to get it 5 bolt.- Dekarson
- Post #3
- Forum: Stock Suspension + Bolt On Kits
-
D
5 bolt conversion k1500?
Hi im planing on making a 5 bolt conversion on my k1500 1989. One way im thinking about is to drill a 5 bolt pattern in my stock hubs. Need to plug and weld one or more holes. Is there a 5 bolt 4wd hub the fits from another truck, chevrolet, dodge etc? This for example...- Dekarson
- Thread
- Replies: 13
- Forum: Stock Suspension + Bolt On Kits
-
D
1989 k1500 3.0TD
Hi, and thanx. I bought a stepside bed. But its really rusty, don't know if I'm going to fix it.or not. I'm going to get it running and test it out alittle while first, then it will get a dieselmeken pump. Aiming for around 300hp. I don't think the rest of the driveline can take much more...- Dekarson
- Post #11
- Forum: Street Build Threads
-
D
C100 pinout
Hi. Im putting a om606 in my 1989 k1500. I'm struggling abit with the wiring Is there anyone who have a pinout for the c100 and the other connector in the firewall. It would be really nice if there were a pinout that show the colour on the wires and what it's for. I have spent a lot of hours...- Dekarson
- Thread
- Replies: 3
- Forum: Audio + Electronics
-
D
1989 k1500 3.0TD
Almost happy with the heigth. Its going to get 2 inches lower in the back. Imalso going to lower the body on the frame 2 inches- Dekarson
- Post #5
- Forum: Street Build Threads
-
D
1989 k1500 3.0TD
Sorry for the huge pics. I cant remove them. i made a set of keys to lower the front of the car.- Dekarson
- Post #4
- Forum: Street Build Threads
-
D
1989 k1500 3.0TD
6 inch drop kit. Sent the th700 to get rebuild. Blasted and painted the front.- Dekarson
- Post #3
- Forum: Street Build Threads
-
D
1989 k1500 3.0TD
I started to ter doown the car to see how much work i t need. Had to fix the rust in cab corner and rockers. Fixed some holes in the roof after a antenna and horns. Blasted and painted the frame with por15- Dekarson
- Post #2
- Forum: Street Build Threads
-
D
1989 k1500 3.0TD
Hi My name is Andreas, i live in Sweden. This is hopefully going to be my buildthread. I bought a 1989 k1500 in a pretty bad condition. It had a 6.2 that had a schwitzer s200 turbo. Ran pretty good but i wanted an diesel with more power than the 6.2 could deliver, and a engine the had a better...- Dekarson
- Thread
- Replies: 10
- Forum: Street Build Threads
