Recent content by 1992chevy

  1. 1

    ULTIMATE TBI mods stage 1

    has anyone actually ran this mod on a dyno to see if it actually does anything for power
  2. 1

    1992 k2500 5spd swap

    ended up buying a sunfire gt for something a little eaiser on gas for traveling 90km round trip every couple days for work, truck still works great have a vibration coming from my rear drive shaft which still has to be lengthened, got the front shaft shortened and installed truck will pretty...
  3. 1

    NEED HELP manual swap, reverse ligths, tail lights not working, and speed sensor

    mine was a auto before, i have the manual connector for reverse light sensor, the speed sensor has two wires coming from it one of which goes to the harness for the auto, the plugs are different on the 2 trans
  4. 1

    Lets see them 8 lugs!! 2500-3500 Photo thread!

  5. 1

    NEED HELP manual swap, reverse ligths, tail lights not working, and speed sensor

    sorry, its actually a nv3500.
  6. 1

    NEED HELP manual swap, reverse ligths, tail lights not working, and speed sensor

    i have a 1992 k2500 4x4, that used to have a 4l80e, i swapped in a nv4500 from a 89, i was wondering if someone already worked through these problems: -No tail lights -reverse lights not working not sure which wires have to be connected to the new plug -speed sensor not working any help...
  7. 1

    1992 k2500 5spd swap

    Does anyone know about splicing the speed sensor into the old auto harness? which wire has to be spliced?
  8. 1

    Starting Issue '98 350 TBI

    i would also say it is a solenoid problem had the same issue this fall with my 92 350, switched the starter out used same solenoid still had same problem, bought new solenoid and installed it on the old starter, works perfect.
  9. 1

    1992 k2500 5spd swap

    alright tranny, t case, cross member is in, rod from the clutch pedal to master cylinder got lost somewhere moving the parts, got the pedal mount up in place but have to get two bolts to mount pedal and the slave, started truck up last night to hear it run for first time in two months. Project...
  10. 1

    weird idle on my 97 5.7

    changed the plugs, wires, cap, and button on my 96', a few months back done the same thing, had 2 plug wires mixed up.
  11. 1

    1992 k2500 5spd swap

    yeah, only thing i got to figure out is reverse lights, 4.3s are externally balanced motors via flywheel, along with 454's, 350s, are not. hopefully going to pick up the tranny and dash+firewall up this afternoon hopefully be mobile this coming weekend!
  12. 1

    1992 k2500 5spd swap

    alright got some good news today, my buddy had a 88 or 89 he bought with a broken frame a while back with only 140k on it, was going to swap the nv3500 into his 92 extended cab, but now hes talking about selling the parts to put a down payment on his new truck, picked up the 350, trans, whole...
  13. 1

    1992 k2500 5spd swap

    Alright figured i'd do a update was going to get into it today, but got caught blowing out from the storm last night
  14. 1

    1992 k2500 5spd swap

    got the new flywheel and clutch today from the store, ran out of time to put it on the truck this evening. i need to replace the hydraulic line going to the internal slave cylinder, how is it removed from the cylinder? i can push it in and turn it. is it a quick connect coupler or something...
  15. 1

    Question about clutch pedal assembly

    how was the clutch pedal to get out? i'm looking for a assembly for my 92, swaping a 5spd in to it is their anything i need to remove from the underside of the dash to install the clutch pedal assembly? is it a seperate unit by itself from the brake and gas pedal mount? do you have any pictures?
See more

Latest posts

Staff online

Members online

... and 21 more.
Total: 1,723 (members: 71, guests: 1,652)

Forum statistics

Threads
64,404
Messages
1,393,223
Members
51,579
Latest member
4oursoldiers

Share this page

Top