Jeffgmcgrr
OBS Enthusiast
After 6 x
You must be registered for see images attach
1 liter flushes I'm still producing brass. Like wtf.Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
No it was drilling out the brass elbow that is connected to the oil sending unit. It broke off flush with the block but realistically it was only like three eighths of an inch off threads, how many times should I be getting gold flakes. GrrAll that brass from an extractor bit?
I would normally agree with you when using Permatex. In his case he is concerned about damaged at the threads and the potential play within them. That is why I recommended using the Teflon tape.
Alright I'm convinced that my flush is adequate. Next comes the issue of timing. What is that part underneath the distributor cap that I took out?