Where can I find good detailed instructions on how to change the door on the Tahoe?

[jrsavoie]

Where can I find good detailed instructions on how to change the driver's door on the 1995 Tahoe?

I found a pair of green front doors for the 1995 Tahoe.

The seller had stripped everything off the doors, so I have to put everything back. If he hadn't felt the need to completely strip the doors down, it would not be such a bad job.

The weather stripping, regulator, door latch and everything has to be re-installed.

is there a good tutorial on how to do this? What glue do I need?

Is there anybody close that wants a little side job? Or a shop close by that somebody wants to recommend?

I also have a couple of rust spots that need repaired on this and other vehicles.

What special tools are needed?

https://www.pricefalls.com/product/...aOLa1wjv9syxj2lnx6s-5l008BKWyGbdlUaAugw8P8HAQ

http://www.walmart.com/ip/42911482?...8192056&wl4=&wl5=pla&wl6=100137331256&veh=sem

 

[AbramF_496]

There's actually one on YouTube on how to change the door pins Start there to get the new doors on and the old doors off. Search on YouTube should be a black truck with a red stripe. Start there


Sent from my iPhone using Tapatalk

 

[jrsavoie]

Thanks
To me the pins are the easy part. Its the regulator, ther weatherstripping and everything else that loses me.

 

[east302]

There's a parts website called 1aauto.com that has videos for replacing parts. I've seen several for door components, look on there for window regulator, door handle, etc. and you should be able to find what you need.




Sent from my iPhone using Tapatalk

 

[jrsavoie]

There's a parts website called 1aauto.com that has videos for replacing parts. I've seen several for door components, look on there for window regulator, door handle, etc. and you should be able to find what you need.




Sent from my iPhone using Tapatalk

Thanks

Any recommendations on special tools and what kind of weatherstripping glue to use? Is there glue involved in this swap?

I am going to build a door installer jack adapter. Like this: http://www.amazon.com/gp/product/B0...ue&ref_=ox_sc_act_title_8&smid=A3EPRARSC3P2QP