What inlet/outlet location to get

[polar]

Well I am redoing my exhaust and doing true duals from my hooker Lon tube headers that exits before the rear tire. I am thinking about buying summit street/strip race mufflers that are 3" in and out. I am gonna use two mufflers instead of a DI/DO. Which type of offset should I get offset in and center out or what?

 

[heavychevy98]

depends on how your exhaust is set up. Meaning the kit may use an offset muffler to raise the tailpipes like mine or any sort of thing so thats the biggest thing to look at. My tail pipes were too low with the Di/Do muffler so i left them off.

 

[West Mi Mudder]

It also depends how the exhaust is routed. Are both tailpipes going to be ran down the same side, then split after the axle? If so, i would get the inlets/outlets on the bottom, that way you can turn the rest of the muffler to face up into the bed.

 

[polar]

The exhaust is going from long tube headers to the front of the rear tire

 

[heavychevy98]

Then probably just center/center.