withoutfear33
I'm Awesome
Bent or stuck valve will do this. Have you done a compression test?
i have not done a compression test, is there a gauge i can rent from a parts store? or where would be the place place to obtain one?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Bent or stuck valve will do this. Have you done a compression test?
Intake gaskets will do this they deteriorate replace if have problem like this.
Sent from my iPhone using Tapatalk
How about your ignition module?
Sent from Robl@and!
This^^^ Most auto parts stores will test them for free.
Can it be replaced without pulling distributor?
Remove cap
Remove two harness connectors
Remove two screws
Remove ICM
Replace in reverse order
Get old one tested before you buy new one. They aren't cheap.
Remove cap
Remove two harness connectors
Remove two screws
Remove ICM
Replace in reverse order
Get old one tested before you buy new one. They aren't cheap.