Muskratt2
Newbie
What is the size limit you can with a 5-8 drip & not have turning issues?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If youre doing spindles and springs you have a little more clearance because part of the drop is achieved without moving the steering arm (2"). You should do the 2" of spring drop and let it settle in before you try to go any farther. Once it all settles out, and you decide you need more, check your clearance (frame to T/R) and decide if youre OK with tapping the frame occasionally. I would get your extra drop by cutting the spring as opposed to going with a 3" drop spring as it makes the spring a bit more stiff and youre starting to run out of room for suspension movement. If you really want to get that llok and do it right so that all the geometry and stuff works correctly, do a stock floor body drop and get it over with.