the 1990 GMC Sierra DD build

[project 67 sub]

Score!!! Got some 99-06 lift spindles, for when I graft a newer front frame section under my truck. So I can have LS power, and a better selection of long travel suspension.

You must be registered for see images attach

Well ... That's not good. Gotta get that fixed ASAP!!! Lol.

You must be registered for see images attach

and on another odd as hell, but good note... changed the brake pads on this beast and the death wobble while hitting the brakes went away. lol

 

[TylerZ281500]

very nice

 

[project 67 sub]

very nice

thanks

______________________________________________________________________________________________________________________________

SCORE!!! CST mid travel control arms, and some shackles for $127 from the local salvage yard

You must be registered for see images attach

You must be registered for see images attach

 

[project 67 sub]

Free Bilstein shocks? Don't mind if I do. Lol

You must be registered for see images attach

Pressure washed all the crap off...

You must be registered for see images attach

 

[project 67 sub]

Templates for upper control arm mount gussets made. Almost time to cut them out of 1/4" steel plate. MIGHT trim them up a bit later as well

You must be registered for see images attach

You must be registered for see images attach

4 of the possible 8 gussets traced out on 1/4" plate. Now to just cut them out.

You must be registered for see images attach

 

[project 67 sub]

4 of the 8 gussets cut out

You must be registered for see images attach

4 of the 8 gussets done. The other 4 will get done when I swap out the control arms

You must be registered for see images attach

$50 Beard suspension seats, and seat track/brackets. Just need new upholstery and foam. Lol

You must be registered for see images attach

You must be registered for see images attach

New bushings for the CST lower control arms

You must be registered for see images attach

 

[project 67 sub]

Free rancho shocks for the rear? Sure why not. Lol. Just gotta put the right upper mount in place of the through bolt.

You must be registered for see images attach

Exhaust remodified (didn't tack weld everything together before welding solid, so had to redo it) after putting a new cat back on it. and also added a turn down on it i stole off the suburban. Lol

You must be registered for see images attach

And Rancho shocks installed

You must be registered for see images attach

 

[GT_80]

Man I wish trucks up here were that nice condition! You don't know how good you have it! That thing is coming along very nicely!

 

[project 67 sub]

Man I wish trucks up here were that nice condition! You don't know how good you have it! That thing is coming along very nicely!

lol. yah i do. ive been all over the US and seen tons of rusty piles. glad i don't usually have to deal with those issues. and thanks. still has a long way to go too

You must be registered for see images attach

 

[project 67 sub]

New tail lights came in... Gonna look nice once I repaint the truck

You must be registered for see images attach

Heck yes!!! 300watt 52" curved LED light bar came in. Should be nice and bright once I get it hooked up, and mounting brackets made

You must be registered for see images attach