Replacement... cab mount bushings?

[94Sierra4x4]

A few of my mounts have shredded bushings, can't seem to find just that rubber chunk anywhere online.
Any ideas guys?

Looking at throwing this 2" bodylift under the truck here shortly but I've been concerned because of how torn they are. May just do it anyways and replace them when I come across something.

 

[phule]

I would look into a energy suspension poly mounts available through summit

Sent from my SM-N910P

 

[HankHill_K2500]

I havent been able to find any new rubber replacements, but you can get polyurethane ones for about $70+

What brand body lift are you using?

 

[SCOTTYINWV]

+1 for energy suspension poly.

 

[94Sierra4x4]

I'll check out the energy ones, and its a performance accessories 2" BL.
Might not be putting it in for a while now, other issues to tend to.

 

[Blue95]

LMC has OEM sets and individuals, that is what I will be doing and the GMT900 rear mounts on mine, Poly will be way stiff and rough.

 

[Steve's Chevy]

I would look into a energy suspension poly mounts available through summit

Sent from my SM-N910P

I did this on my lowered 90, man it handled so good after that. I now have a new box of energy sitting on my tool box for my ext cab... just trying to find time to install them...

 

[94Sierra4x4]

Actually only the two rear cab ones are really mangled.. Maybe I should go the gmt900 route.

 

[Blue95]

If you have about $330 go for it

 

[SkyHighColorado]

I run ES body bushing (red). Great quality and price. Doesn't make the ride hard or anything, you may get a couple more vibrations in the cab that you didn't before. I could honestly barley even tell the difference other than having everything align straight.

You must be registered for see images attach

old mounts were total . one was missing. this was the best looking stock mount.

You must be registered for see images attach