Rear wheel spacers

[SixSpeedSS]

I was looking at these a while back to replace the ones on my 454SS. They have 8 lug as well.

http://www.motorsport-tech.com/

mattillac...what size tire/wheel you running?

 

[jps4jeep]

My understanding for the narrower rear axle is to 1. assist with turning radius 1. reduces rear tire scrub when turning.
I do not know if this is true, but it is what I have been told, thought I would share.

 

[LoudnLifted88]

i have 2 inch steel ones on the axle under my new frame but thats a ff axle im not sure id trust them on a non ff axle

 

[MTM1]

I'd trust a wheel spacer on anything. Spacing is spacing whether you get it from a wheel or a spacer. I have run them for about 8 years and haven't had any trouble. In fact I have a friend that sled pulls with his...his had the same set up for 10 years and never once have they broke. Buy a quality spacer and check them on occasion

 

[454ss]

mtm1, where did you get yours? id like a set of 1'' or 1.5'' for my k3500.

 

[2000CCSB]

yeah 2x^^^^^^^

 

[bluex]

Rough country sells 2" for like $60/pair iirc. I got mine from there scratch an dent store cheaper than that though....

 

[mattillac]

....mattillac...what size tire/wheel you running?

Those are BFG LT265/75R16 on American Racing Teflon Mojave.

In case anyone needs, this is where the spacers I use came from http://www.performancewheel.com/wheel-spacers-adapters/

 

[MTM1]

mtm1, where did you get yours? id like a set of 1'' or 1.5'' for my k3500.

Billet wheel adapters

 

[88GMCtruck]

I've been thinking about running a set on my 88 ever since going to 8-lug. The rear 14FF was as wide as my 2wd 14SF with 1.5" spacers, but converting the D44 to 8-lug moved the fronts out 1 1/4" wider on both sides....