Torchred
Carolina Can
Better picture of the difference
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Better picture of the differenceYou must be registered for see images attach
i looked at those a lot. I ding remember why I didn't go with oneAnybody have any opinions on the Doetsch kits before I pull the trigger on one over the RCX? Was looking at getting the 6/3 Doetsch kit simply cause the lift is bigger than the RCX kit.
i looked at those a lot. I ding remember why I didn't go with one
i think it's 4" spindles, 2" coil springs and a 3" block is why I didn't get it. Already had he springs and gat d themI've only ever seen anybody with the RCX kit for 2WDs. Granted they are cheaper, I'm looking for a little more than 4". Couldn't find anything really bad to say about Doetsch products though so I think I'm going to order the Doetsch 6/3 kit. May be a few weeks until it's received and installed but I'll post pics when its done.
i think it's 4" spindles, 2" coil springs and a 3" block is why I didn't get it. Already had he springs and gat d them
dont. You're better off leaving the old springs in. I bought moog springs and they didn't fit. Apparently, no one makes the correct springs for our trucks. I tried 5 different springs from rockauto and non workedNo springs anymore, just coil spacers. Ill probably take the opportunity and replace a bunch of my steering components while I'm at it, maybe even buy a set of new coils. Not a whole lot of sense in putting the lift on the original springs. Any suggestions for new ones? Was looking at Moog today...
dont. You're better off leaving the old springs in. I bought moog springs and they didn't fit. Apparently, no one makes the correct springs for our trucks. I tried 5 different springs from rockauto and non worked