Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Only on 6 lug ones I believe. The 8 lug ones use a different spindle...Rough country's 4" spindle? That works for c2500 I believe.
Only on 6 lug ones I believe. The 8 lug ones use a different spindle...
Right. Forgot to add thatOnly on 6 lug ones I believe. The 8 lug ones use a different spindle...
Well, I got my Bushwacker OE flares in Saturday and I also got my rims in Wednesday and got them mounted and balanced yesterday after work. Then I went home and did the 6 lug conversion with the 2500LD rotors and then went down the street to my friends shop and put in the 1999 Denali rear axle with 3.73.
I still have to install the green overlay vinyls on the wheels but I might try to do that tonight.
Here's the Bushwacker box, and yes if you can read it, it says 3/25/03 on the ID tag for when they were made and nothing has changed since 2003 because the website still uses the same install sheet.
You must be registered for see images attach
You must be registered for see images attach
Here was the rims after I got the tires installed.
You must be registered for see images attach
This is at my friend's shop after we got the axle installed.
You must be registered for see images attach
And finally, here is a picture of it this morning with the wheels mounted. 20x10 Anthem A731 Commander wheels wrapped in 285/60/20 Kanati Trail Hog's.
You must be registered for see images attach