Post your lifted 2wd's!

[goobs]

Last i checked those have been discontinued. Havent seen any used come up for sale yet.
If i could find a set i would jump on them in a heartbeat


Sent from my SM-N910P

there is a shop somewhere that has a set on the shelf. i would call 4wp and see what they say.

 

[HooliganC2500]

I use run 295 procomp at's on my truck. Trimmed a little off my bumper and inner fender down on the bottom

 

[Steve's Chevy]

I use run 295 procomp at's on my truck. Trimmed a little off my bumper and inner fender down on the bottom

Cool, just out of curiosity what was the wheel size and backspace ?
Do you have any pics?

Thanks

 

[oohunter04oo]

Cool, just out of curiosity what was the wheel size and backspace ?
Do you have any pics?

Thanks

I may have told u this before, not sure. But I know an old coworker of mine ran 295/70r17s nitto terra grapplers on some Impala SS rims on his Tahoe with no rubbing. He had Fabtech spindles only. I know they didn't rub and I don't think he trimmed anything.

 

[Steve's Chevy]

I may have told u this before, not sure. But I know an old coworker of mine ran 295/70r17s nitto terra grapplers on some Impala SS rims on his Tahoe with no rubbing. He had Fabtech spindles only. I know they didn't rub and I don't think he trimmed anything.

Well I had to trim for the 285's I'm sure it's due to my backspace, just wondering how much more trimming for the 295.

 

[oohunter04oo]

Well I had to trim for the 285's I'm sure it's due to my backspace, just wondering how much more trimming for the 295.

My next sets going to be 305/65r17's. On a set of 17x9 wheels. Not sure which wheels yet tho. Also thinking of putting the 2" RC lift on it with my lift spindles.

 

[Steve's Chevy]

My next sets going to be 305/65r17's. On a set of 17x9 wheels. Not sure which wheels yet tho. Also thinking of putting the 2" RC lift on it with my lift spindles.

I was thinking that size in the pro comp mt2. I've been looking for a used tire to put on my spare wheel just to see how it will fit before buying a set...

 

[Chevy-Art]

Figured out its almost been 2 years since i been on here. First thing i find is this sweet thread. Had to post up my 90 c2500 RCLB up with my 4" chassis tech spindles. 285's hankook at's on 17" eagle alloys. No block lift in rear all stock. Extended rubber brake lines

You must be registered for see images attach

Nice, good looking truck.

 

[Daly]

I'm thinking of lifting my c2500 4", my question is will 18x9 with 0mm offset and 275/70/18's clear, or would I have better luck with 285/65/18's…

I'm contemplating taking the level out of my 2014 and returning it to stock, and was thinking about using the rims and tires on it on the 91 c2500…

 

[cjman250]

I'm thinking of lifting my c2500 4", my question is will 18x9 with 0mm offset and 275/70/18's clear, or would I have better luck with 285/65/18's…

I'm contemplating taking the level out of my 2014 and returning it to stock, and was thinking about using the rims and tires on it on the 91 c2500…

275 should clear alright