Just tried turning it over with the fuel pump and all the spark plug wires hooked back up and its having trouble even turning over now? So I unplugged the spark plug wire going to the condenser and it turns over no problem.. only things I can think of is either the distributor is out 180° or maybe the crank position sensor or is it something more major like seized bearings or just a clogged screen on the pump
It doesnt have a condenser. Its a TBI not a point system. Did you mean the coil wire?
Go back to square one.
Make sure that you have the distributor set at TDC on the compression stroke.
Watch as many videos as you can and set it right.
Nothing, nothing, nada will work unless you get this right.
All else is just chasing your own tail.
This is the very basis of understanding how an engine works
It isnt difficult, it just takes some homework.
Get this, and all else will open up before your eyes.
Get it to tdc, then we can work on stabbing the TBI distributor on the right tooth.
Which is cake
Its all all all about the timing
Thats how engines work